|
EN 10002 - 1
|
1996
|
Metallic materials; tensile testing; part 1: method of test
|
|
EN 10002-1/AC/1
|
1996
|
Metallic materials; tensile testing; part 1: method of test; amendment to EN 10002 - 1
|
|
EN 10002 - 2
|
1996 - 06
|
Metallic materials; tensile testing; part 2: verification of the force measuring system of the tensile testing machines
|
|
EN 10002 - 3
|
1996 - 06
|
Metallic materials; Tensile testing; Part 3: Calibration of force proving instruments used for the verification of uniaxial testing machines
|
|
EN 10002 - 4
|
1994 - 11
|
Metallic materials; tensile test; part 4: verification of extensiometers used in uniaxial testing
|
|
EN 10002 - 5
|
1991 - 10
|
Metallic materials; tensile testing; part 5: method of testing at elevated temperature
|
|
EN 10003 - 1
|
1996
|
Metallic materials; Brinell hardness test - Part 1: Test method
|
|
EN 10003 - 2
|
1996 - 06
|
Metallic materials; Brinell hrdness test; -Part 2: Verification of Brinell hardness testing machines
|
|
EN 10003 - 3
|
1996 - 06
|
Metallic materials; Brinell hrdness test; -Part 3: Calibration of standardized blocks to be used for Brinell hardness testing machines
|
|
EN 10004 - 1
|
1991 - 02
|
Metallic materials; hardness test; part 1: Rockwell test (scales A, B, C, D, E, F, G, H, K )
|
|
EN 10004 - 2
|
1991 - 02
|
Metallic materials; hardness test; part 2: verification of Rockwell hardness testing machines (scales A, B, C, D, E, F, G, H, K )
|
|
EN 10004 - 3
|
1991 - 02
|
Metallic materials; hardness test; part 3: calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A, B, C, D, E, F, G, H, K )
|
|
EN 10045 - 2
|
1996 - 06
|
Metallic materials; Charpy impact test; part 2: verification of the testing machine ( pendulum impact )
|
|
EN 10109 - 1
|
1996
|
Metallic materials - Hardness test - Part 1: Rockwell test (scales A, B, C, D, E, F, G, H, K) and Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T and 45T)
|
|
EN 10109 - 2
|
1996 - 06
|
Metallic materials - Hardness test - Part 2: Verification of Rockwell hardness testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
|
|
EN 10109 - 3
|
1996 - 06
|
Metallic materials - Hardness test - Part 3: Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
|
|
EN 10232
|
1993 - 10
|
Metallic materials; tube (in full section); bend test
|
|
EN 10233
|
1993 - 10
|
Metallic materials; tube flattening test
|
|
EN 10234
|
1993 - 10
|
Metallic materials; tube drift expanding test
|
|
EN 10235
|
1993 - 10
|
Metallic materials; tube flanging test
|
|
EN 10236
|
1993 - 10
|
Metallic materials; tube; ring expanding test
|
|
EN 10237
|
1993 - 10
|
Metallic materials; tube; ring tensile test
|
|
EN 10238
|
1995 - 12
|
Automatically blast cleaned and primed steel products
|
|
EN 10251
|
1995 - 07
|
Magnetic materials - Methods of determination of geometrical characteristics of electrical steel sheet and strip
|
|
EN 10252
|
1995 - 02
|
Magnetic materials - Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies
|
|
CR 10261
|
1995 - 01
|
ECISS Information Circular 11 - Iron and steel - Review of available methods of chemical analysis
|
|
ENV 22605 - 1
|
1991 - 10
|
Steel products for pressure purposes; derivation and verification of elevated temperature properties; part 1: yield or proof stress of carbon and low alloy steel products (ISO 2605-1: 1976)
|
|
ENV 22605 - 2
|
1991 - 10
|
Steel products for pressure purposes; derivation and verification of elevated temperature properties; part 2: proof stress of austenitic steel products (ISO 2605-2: 1976)
|
|
ENV 22605 - 3
|
1991 - 10
|
Steel products for pressure purposes; derivation and verification of elevated temperature properties; part 3: alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limit (ISO 2605-3: 1985)
|
|
EN ISO 945
|
1994 - 07
|
Cast iron - Designation of microstructure of graphite (ISO 945 : 1975)
|
|
EN ISO 10380
|
1995 - 05
|
Corrugated flexible metallic hose and hose assemblies (ISO 10380 : 1994)
|
|
EN 10228 - 1
|
1994 - 05
|
Non-destructive testing of steel forgings - Part 1: Magnetic particule inspection
|
|
EN 10228 - 2
|
1994 - 05
|
Non-destructive testing of steel forgings - Part 2: Penetrant testing
|
|
EN 10228 - 3
|
1994 -12
|
Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings
|
|
EN 10228 - 4
|
1996 -12
|
Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-feritic stainlless forgings
|
|
EN 10246 - 1
|
1995 - 09
|
Non-destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
|
|
EN 10246 - 2
|
1995 - 11
|
Non-destructive testing of steel tubes - Part 2:
|
|
EN 10246 - 3
|
1995 - 10
|
Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc welded) steel tubes for the detection of imperfections
|
|
EN 10246 - 5
|
1995 - 10
|
Non-destructive testing of steel tubes - Part 5:Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for the detection of longitudinal imperfections
|
|
EN 10246 - 6
|
1995 - 10
|
Non-destructive testing of steel tubes - Part 6:Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections
|
|
EN 10246 - 7
|
1995 - 09
|
Non-destructive testing of steel tubes - Part 7:Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections
|
|
EN 10246 - 8
|
1995 - 10
|
Non-destructive testing of steel tubes - Part 8:Automatic ultrasonic testing of the weld seam of electric resistance and induction welded steel tubes for the detection of longitudinal imprefections
|
|
EN 10246 - 9
|
1995 - 10
|
Non-destructive testing of steel tubes - Part 9:Automatic ultrasonic testing of the weld seam of submerged ar welded steel tubes for the detection of longitudinal and/or transverse imperfections
|
|
EN 10246 - 10
|
1995 - 10
|
Non-destructive testing of steel tubes - Part 10:Radiographic testing of the weld seam of submerged arc-weld steel tubes for the detection of imperfections
|
|
EN 10246 - 14
|
1995 - 10
|
Non-destructive testing of steel tubes - Part 14:Automatic ultrasonic testing for the detection of laminar imperfections for seamless and welded (except submerged arc-welded) steel tubes
|
|
EN 10246 - 15
|
1995 - 10
|
Non-destructive testing of steel tubes - Part 15:Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections
|
|
EN 10256
|
1995 - 06
|
Non-destructive testing of steel tubes - Qualification and competence of levels 1 and 2 non destructive testing personnel
|
|
EN 29302
|
1991 - 02
|
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; electromagnetic testing for verification of hydraulic leak-tightness
|
|
EN 29303
|
1991 - 02
|
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; full peripheral ultrasonic testing for the detection of longitudinal imperfections
|
|
EN 10036
|
1996 - 08
|
Chemical analysis of ferrous materials; determination of total carbon in steels and irons; gravimetric method after combustion in a stream of oxygen
|
|
EN 10071
|
1996 - 08
|
Chemical analysis of ferrous materials; determination of manganese in steels and irons; electrometric titration method
|
|
EN 10136
|
1989 - 01
|
Chemical analysis of ferrous materials; determination of nickel in steels and irons; flame atomic absorption spectrometric method
|
|
EN 10177
|
1989 - 01
|
Chemical analysis of ferrous materials; determination of calcium in steels; flame atomic absorption spectrometric method
|
|
EN 10178
|
1989 - 01
|
Chemical analysis of ferrous materials; determination of niobium in steels; spectrophotometric method
|
|
EN 10179
|
1989 - 01
|
Chemical analysis of ferrous materials; determination of nitrogen (trace amounts) in steels; spectrophotometric method
|
|
EN 10181
|
1989 - 01
|
Chemical analysis of ferrous materials; determination of lead in steels; flame atomic absorption spectrometric method
|
|
EN 10184
|
1989 - 05
|
Chemical analysis of ferrous materials; determination of phosphorus in steels and irons; spectrophotometric method
|
|
EN 10184/AC
|
1991 - 09
|
Chemical analysis of ferrous materials; determination of phosphorus in steels and irons; spectrophotometric method; amendment
|
|
EN 10188
|
1989 - 05
|
Chemical analysis of ferrous materials; determination of chromium in steels and irons; flame atomic absorption spectrometric method
|
|
EN 10200
|
1991 - 12
|
Chemical analysis of ferrous materials; determination of boron in steel; spectrophotometric method
|
|
EN 10201
|
1988 - 01
|
Chemical analysis of ferrous materials; determination of silicon in steels and iron; flame atomic absorption spectrometric method
|
|
EN 10211
|
1995 - 10
|
Chemical analysis of ferrous materials - Determination of titanium in steel and iron - Flame atomic absorption spectrometric method
|
|
EN 10212
|
1995 - 03
|
Chemical analysis of ferrous materials - Determination of arsenic in steel and iron - Spectrometric method
|
|
EN 10265
|
1995 - 12
|
Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability
|
|
EN 10276 - 1
|
1995 - 09
|
Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination
|
|
EN 24159
|
1989 - 05
|
Ferromanganese and ferrosilicomanganese; determination of manganese content; potentiometric method (ISO 4159, 1 st edition 1978.12.15)
|
|
EN 24159/AC 1
|
1989 - 06
|
Ferromanganese and ferrosilicomanganese; determination of manganese content; potentiometric method; amendment 1 to EN 24159 : 1989 (ISO 4159 : 1978)
|
|
EN 24829 - 1
|
1990 - 03
|
Steel and cast iron; determination of total silicon content; reduced molybdosilicate spectrophotometric method part 1: silicon content between 0,05 and 1%
|
|
EN 24829 - 1/AC
|
1991 - 09
|
Steel and cast iron; determination of total silicon content; reduced molybdosilicate spectrophotometric method part 1: silicon content between 0,05 and 1%; amendment (ISO 4829-1 : 1986)
|
|
EN 24829 - 2
|
1990 - 03
|
Steel and cast iron; determination of total silicon content; reduced molybdosilicate spectrophotometric method part 2: silicon content between 0,01 and 0,05%
|
|
EN 24829 - 2/AC
|
1991 - 09
|
Steel and cast iron; determination of total silicon content; reduced molybdosilicate spectrophotometric method part 2: silicon content between 0,01 and 0,05%; amendment (ISO 4829-2 : 1986)
|
|
EN 24934
|
1989 - 05
|
Steel and cast iron; determination of sulfur content; gravimetric method (ISO 4934, 1 st edition 1980.10.01)
|
|
EN 24935
|
1991 - 12
|
Steel and cast iron; determination of sulfur content; infrared absorption method after combustion in an induction furnace (ISO 4935 : 1989)
|
|
EN 24935/AC
|
1992 - 06
|
Steel and iron; determination of sulfur content; infrared absorption method after combustion in an induction furnace; amends (ISO 4935 : 1989)
|
|
EN 24937
|
1990 - 03
|
Steel and iron; determination of chromium content; potentiometric or visual method
|
|
EN 24937/AC
|
1991 - 09
|
Steel and iron; determination of chromium content; potentiometric or visual method; amendment (ISO 4937 : 1986)
|
|
EN 24938
|
1990 - 03
|
Steel and iron; determination of nickel content; gravimetric or titrimetric method
|
|
EN 24938/AC
|
1991 - 09
|
Steel and iron; determination of nickel content; gravimetric or titrimetric method; amendment (ISO 4938 : 1986)
|
|
EN 24943
|
1990 - 03
|
Chemical analysis of ferrous metal; determination of copper content; flame atomic absorption spectrometric method
|
|
EN 24943/AC
|
1991 - 09
|
Chemical analysis of ferrous metal; determination of copper content; flame atomic absorption spectrometric method; amendment (ISO 4943 : 1985)
|
|
EN 24946
|
1990 - 03
|
Determination of copper content in steel and cast iron
|
|
EN 24946/AC
|
1991 - 09
|
Steel and cast iron; determination of copper content; 2,2` diquinolyl spectrophotometric method; amendment (ISO 4946 : 1984)
|
|
EN 24947
|
1991 - 03
|
Steel and cast iron; determination of vanadium content; potentiometric titration method (ISO 4947 : 1986)
|
|
EN ISO 10280
|
1995 - 09
|
Steel and iron - Determination of titanium content - Diantipyrylmethane spectrophotomatric mathod (ISO 10280 : 1991)
|
|
EN ISO 10700
|
1995 - 09
|
Steel and iron - Determination of manganese content - Flame atomic absorption spectrometric method (ISO 10700 : 1994)
|
|
EN 10211
|
1995 - 03
|
Chemical analysis of ferrous materials - Determination of titanium in steel and iron - Flame atomic absorption spectrometric method
|
|
EN ISO 10806
|
1995 - 05
|
Pipework - Non-alloyed and stainless steel fittings for corrugated flexible metallic hoses (ISO 10806 : 1994)
|
|
EN ISO 10807
|
1995 - 05
|
Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmospheres (ISO 10807 : 1994)Warning: withdrawn document
|
Printable Version
